Wide base provides effective guiding and easy trimming
Offers numerous additional trimming possibilities, thanks to the unique tilting and adjustment system
Equipped with a powerful 750W motor with electronic speed adjustment and constant torque control for a constant motor speed under load
External dust collector connection
Lateral fence, avoids the irregularities of the edges can be copied
Copier with ball bearing. Perfect guiding on straight or curved surfaces
Guide ring for copying with template as a small router
Easier, more accurate trimming, with the special 90º bit
The machine body can be tilted to approx. 46.5º, so that the edge of the bit is at 1.5º to the surface, preventing damage when trimming excess edges. Once the excess coating has been trimmed from the board surface, just position the bit at the level of the base to trim the excess edge level with the surface. By simply operating a single adjustment control, you can trim a further excess surface or edge. By tilting the machine to the horizontal position, you can trim 45º chamfered edges. You can also chamfer to the angle you require between 0º and 45º, by tilting the motor body to the requires intermediate angle.
Trimming with the straight bit
The Tiltable motor body permits the trimming of straight edges with the straight bit as well as the excess surface. Excess panel is trimmed with the motor body in the vertical position, and edges with the motor body inclined to 91.5°, ie: 1.5º below the board surface, thereby avoiding damage.
Reviews
There are no reviews yet.